Vilene Iron-On Bias Tape (White) (burda, patrones, and more)
Authentic Vilene Iron-On Bias Tape in White color for all your lighter garments.
An Iron-on Bias cut tape with a run of chain stitches, can be used for strengthening neck and armhole edges and to prevent fabric from stretching or distorting the shape.
If you sew with Burda, Patrones, or Knip Mode Sewing Patterns you are already aware that they call for the use of Vilene Bias Tape on certain garments. This is the one you need.
Method of use: The band is ironed on in such a way that part of the bias tape remains on the fabric edge and the seam is made just behind the chain stitch. Slowly but firmly press with a dry iron, about 8 seconds per area. Iron Setting: Wool. Can be used on all fabrics. Washable at 40 degrees and Dry-cleanable. Approximately 1/2 inch wide (12.7mm) with top stitching off centre. When fusing, position the widest part of tape to fabric edge. Sew behind the top row of stitching.
Listing is for one yard.
If you buy more than one yard, you will receive one continuous piece.
Colors available are White and Charcoal.